More Supplies

I finally decided to go with Macassar Ebony for the fretboard and peghead on the octave mandola, and I've bought a couple of bits on e-bay. I have also decided to try and make an ebony tailpiece, along the design of those used on violins and cellos.

neck and body

Things are starting to move on a bit now. I'm just about to glue the back on, and I've shaped the neck. I now need to order the wood for the fretboard and peg head (and maybe tailpiece). I was going to use Madagascar ebony, but I might try kingwood.

On with the neck

I'm just fitting the truss rod to my walnut neck, and I have had to cut a thread for the first time. It turned out to be pretty straightforward...

New Wood

Both instruments lurched forward a bit. The cittern belly got a set of braces (shown not quite finished here). When I have tidied up the two little braces I will be setting this one aside for a while.




I prepared the tailblock for the octave mandola from some of the alaskan spruce, and glued the walnut ribs to it. I am pretty happy with the joint. I also 'bent' a set of linings from some willow I had in stock (shown in the foreground of the photo). I will probably use these for the backs of both instruments, and make some spruce ones for the bellies. Or then again, I might use stick with just the willow.



Finally, I received a shipment of walnut from Paul at Goulden Hardwoods who was really helpful. I will be using one bit to make the neck of the Octave Mandola, and the other bits may well find there way into future mandolins...

Braces and Ribs

After the lads got beaten at football, I finished off the braces for the octave mandola. I then bent my walnut ribs and put them into the mould. The walnut bent quite easily, and looked really pretty when darkened in the water. The ribs were a little too long for the mould so had to do a bit of trimming and also take out one of the turn-buttons. I will leave the ribs to dry in the mould for a few days.

I have been looking around for some UK-based wood suppliers, especially with the dollare so strong, and I have a couple of leads. I'm trying out Yandles for some maple and sycamore (for the back braces), and contacting tonewood-suppliers to look for some fingerboards, back and neck wood.

Progress at last

I made good on my intention to get restarted on the instrument making, and over this weekend glued up the back of the octave mandola. The two bookmatched pieces are only just big enough and I have have no spare at all. There may be enough for the 'button', but this might have to be made from a separate piece of figured walnut.

I also glued the tone bars to the yellow cedar belly. I had forgotten how quickly the Titebond glue sets and had to scrape some half set adhesive off the bars when I made a hash of it the first time through. With the bars its better to use too much glue to start with and squeeze out the excess. It was much better on the second attempt.

Back to the lutherie

I'm happy to report that the cloakroom is now done (except for wiring in the shower which I will get a proper sparky to do) and I can back to making instruments. I have sharpened up my chisels, plane irons and cabinet scrapers and I'm ready to go. I have even tidied up my garage to celebrate the start of the new year.

I have done some of the calculations (string tension, nut spacing etc.) and set these out on two design sheets (one shown to the left). Next I need to make the octave mandola back from the e-bay walnut.

Cloakroom

Just so you know, this is the reason that I'm on my self-imposed luthiery ban. I still hope to have it finished by Christmas.

Grrrrrr

I'm currently 'fixing up' the cloakroom and so am a self-imposed ban from any proper luthiery - the tension is starting to build! So instead, I've been shopping with some birthday funds. I've bought a set of plans for a Gibson Les Paul, as a guide to building No. 1 son's 21st birthday present and a new set of nut files (all from the marvelous Stew-Mac). I also located a walnut back and sides set on e-bay, and it arrived in the post today. I like the contrasting colours, but it's going to be a tight squeeze for the octave size.

Gittern Plans

This is my current plan - drawn out on holiday:

Soundhole cut out

I've now cut out the soundhole and the outline of the belly. I've also added some reinforcement on the inside to protect the fragile edge of the soundhole. Next to fit the braces.

Commissions

My sister has asked me if I can make her a stringed instrument suitable for playing at a Tudor historical recreation. I have done a bit of research, and the lute looks the most appropriate. However, I'm not ready to do a 'ribbed' bowl back instrument yet, so I will suggest a Gittern. These appeared in the 14th century, and didn't disappear until the 17th or 18th, so she shouldn't get thrown out for having an anachronism! I have also been given an electric guitar (belonging to a friend of my elder son) to fix - a bit of electrics and possibly a new set of frets.

Purfling

I faced a bit of a challenge putting in the purfling which goes round the soundhole. I had been wondering for a while how to cut a neat oval channel. In the end I made a template out of some 1cm thick oak (from an old drawer side) and used this to guide a mini router. My practise attempt went well, but on the real thing the router bit slipped down while I was cutting and the channel was a bit too deep in one place. Still, no real harm done, and the fitted purfling looks quite good.

I will now cut out the soundhole itself (just inside the purfling, and re-inforce the inside with a strip of sycamore veneer.

Second Belly

The second belly is now glued up and thicknessed. I have also made the first set of braces (also shown in the picture). The little picture is a close up of the 'bearclaw' figure on the spruce - I can't say it looks much like anything done by a bear!

Nearly Oops

I have now marked out the treble bars on the correct side!

Belly work

The first belly is now cut out (including the soundhole). The photo is the inside with the positions of the braces marked out in pencil. I have already sawn the timber for the braces (spruce) and these now need shaping and gluing into place. My daughter will be glad when I've finished working on the yellow cedar belly wood as she doesn't like the smell at all!

First belly glued up

I have now glued up the two pieces of yellow cedar to make the first belly. I have just been in to the garage to take a photo and it has bowed rather alarmingly. I think that it may be something to do with the leather mat I left it on (the remains of our old leather sofa). Fortunately, the bow is the same way as the wood will be bent to make the belly and the joint is completely sound. The wood 'rings' quite nicely when I knock it. The yellow cedar seems more pliable than the spruce, and I wonder if this contributes to the 'mellow' tone that it is supposed to impart.

The bellies begin

Much excitement as my box of wood arrived from Alsaka. The company, Alaska Speciality Woods kindly included a magazine about Prince of Wales Island, where they are based - it looks very beautiful. Fishing appears to be the main pastime! I have given both sets of soundboards a tidy up with a plane.

The first picture is the yellow cedar - destined for the mandola. It has a strong scent which is particlarly noticable whent its being planed. I quite like it, but my daughter reckons it smells horrible.

The other picture is the sitka spruce for the cittern. The 'bearclaw' figure is quite light, but pretty nevertheless.

The next job is to 'shoot' the boards (plane them square for joining).

My Stuff

My veneers arrived from Anita Marquetry (these will make the stripes down the neck), but I didn't have any luck at Craft Supplies - they don't seem to have anything in stock!

I have now ordered the tops from Alaska. One Sitka spruce (for the cittern) and one yellow cedar (for the mandola).

Shopping

I have started my big shopping session for the wood and other bits and pieces for the two instruments. The cittern (10 strings) will have a spruce front and maple back and sides, with maple linings and some purfling. The neck will be laminated maple, and the fretboard and peg head veneer will be ebony. The octave mandola will also have a spruce front, but with a walnut back and sides. The neck will be laminated walnut, and the fretboard and peghead will be maple (a bit unusual, I hope). I intend to sell one of these instruments (I don't think I mind which one) and reckon on asking about £500. I'd better make sure that they're top quality!